Grinding mills are mainly used to grind various non-metallic and metallic ores, such as limestone, gypsum, calcite, etc. They have the characteristics of large processing capacity, adjustable discharge fineness, stable operation, etc., and are very suitable for the raw material clinker grinding link in cement production lines.

YGM high pressure mill is a kind of equipment used for grinding, especially suitable for crushing barite, limestone, ceramics, slag and other non-flammable and explosive materials with Mohs hardness below 9.3 and humidity below 6% in mining, metallurgy, chemical industry, building materials and other industries. Its finished product particle size can be adjusted within the range of 80-425 mesh, and the finest can reach 1000 mesh, so it can fully meet the grinding demand of 300 mesh.

As a popular building material, what are the advantages of ceramsite sand? Baichy Heavy Industry will discuss the characteristics, production process and uses of ceramsite sand for you.

Spiral classifier is one of the mineral processing equipment. It is a kind of equipment that uses the principle that solid particles have different specific gravities in liquids and therefore different sedimentation rates for mechanical classification.

Common mobile crushing plant models include tire-mounted impact crushing station and crawler-mounted cone crushing plant, etc. These equipment are suitable for crushing materials of different hardness and size.

The spiral classifier commonly used in mineral processing is a mechanical classification device based on the principle that solid particles with different specific gravities have different sedimentation rates in liquids.

Conveyor belt, also known as a transport belt, transmission belt, or conveyor belt, is another form of belt in industrial belt and is a kind of conveyor belt specially used to transport materials. In the process of conveying materials such as gravel and sand, the conveyor belt realizes the rapid and stable transmission of a large amount of materials through a continuous belt structure, which greatly improves work efficiency.

For 150-200tph (tons per hour) rock crushing equipment, and the output particle size is required to start from 0.5mm, the following are some recommendations and analysis from Baichy Heavy Industry: