Jaw crusher is a commonly used crushing equipment that can break larger block materials into smaller particles. The working principle of the jaw crusher is to crush the material through the force of friction and extrusion, thereby reducing the primary size of the material. Jaw crusher has the follo

Iron ore is an important raw material for iron and steel production enterprises. Natural ore (iron ore) is gradually extracted from natural ore (iron ore) through procedures such as crushing, grinding, magnetic separation, flotation, and gravity separation. It is a mineral aggregate containing iron element or iron compound that can be economically utilized. The material needs to be processed by equipment before it can be suitable for use. The iron ore crushing production line is a dedicated iron ore processing production line with high production efficiency.

Quartz sand is a kind of non-metallic mineral, which is a kind of non-metallic mineral, which is a kind of silicate mineral with hard, wear-resistant, and stable chemical properties. Equipment for processing quartz sand, in addition to the traditional impact Type sand-making machine, the ball mill is also a good choice.

According to previous communication, your needs are as follows:
Project planning: 250 tons of stone production line per hour
Raw ore: river pebbles, raw sand content 20%, raw ore specification: ≤720mm (≤200 content accounts for 50%)

HPM500 cone crusher has four types of crushing chambers: coarse crushing, medium crushing, fine crushing, and super fine crushing. The production capacity is 180~790t/h. Different chamber types have different discharge opening sizes, and the superfine crushing cavity type has a minor discharge port.

Project address: Russian Federation
Project output: 100t/h
Equipment configuration: Vibrating feeder ZSW850*3000; Jaw crusher PE500*750 Vibrating, 4YK1848 Vibrating Screen, Iron remover, Belt B650
Screen aperture: 10, 20, 40, 70mm

According to the mineral properties and discharge requirements, the filling rate of general ball is 32-45%, and the density of steel ball is about 4.5t/m ³。 The density of high alumina ceramic ball is about 3.7t/m ³。 The wet ball mill mainly depends on grinding rather than impact in the grinding process, so the steel ball filling rate is slightly lower, and the steel ball filling rate of dry ball mill is slightly higher.

YGM160 Grinding mill machineFeeding Size :≤ 35mmOutput Size :0.613-0.033mmCapacity :18-36t/hPower :132kwYGM mill video link：https://youtu.be/C9F8rMm_48UYGM high-pressure mill is used for crushing barite, limestone, ceramics, slag, and other non-flammable and explosive industries with Mohs hardness l